Steel Plates

Product Details:

Sheffield 14% Manganese is a true Hadfield Austenitic Manganese steel for resistance to severe impact and abrasive wear. This product will work harden in service up to 550 BHN. Because this product hardens under cold work conditions care should be taken when forming, drilling or machining is being considered.

Sheffield 14% Manganese can be welded with standard manganese electrodes. Please use only certified personnel who are familiar with working with this type of material. Drilling is not recommended for this product. Manganese is grey-white metal with a pinkish tinge and a very brittle but hard metallic element. Manganese is a reactive element that easily combines with water and air. It is a steel with a relatively large component about 10-14% of manganese; highly resistant to wear and shock. The original austenitic manganese steel, containing about 1.2%C and 12% Mn.

Manganese Advantages
Work Hardening refers to the fact that the steel becomes harder and harder the more it is impacted or compressed.
The "Hadfield" grade has an original hardness of approximately 220 BRINELL. With the continued impact and /or compression it will surface harden to over 550 BRINELL.

It should be noted that only the outer skin surface hardens. The underlayer remains highly ductile and tough. As the surface wears, it continually renews itself becoming harder and harder.
Manganese steel is an austenitic steel which means it is non-magnetic. This property makes it useful in many applications such as bottom plates for lifting magnets - separator drum shells for magnetic materials - wear shoes on electric brakes etc.

Advantages

• Resistance to high abrasion and severe impact.
• Will work hardened rapidly to 550BHN.
• Remains ductile throughout.
• Hadfield Grade.
• Can be welded.
• Has non-magnetic properties.
• Can be cut with the oxy-acetylene torch, plasma, water jet, or laser.
• Made to the toughest standards in the industry for extended service life.

Applications

• Wheelabrator
• Shake-Out Decks
• Shot Blast Cabinets
• Sintering Seal Bars
• Scrappers
• Screens
• Crusher Liners
• Grader Blades
• Elevator Buckets
• Baffle Plates
• Stone Chutes
• Bucket Liners
• Crusher Jaws
• Hammers
• Chain Wear Bars
• Grizzly Bars

Equivalent Standards

Product Details:

ASTM A204 specification covers molybdenum alloy steel plates, intended particularly for welded boilers and other pressure vessels. ASTM A 204plates are available in three grades (Grade A, Grade B, Grade C) having different strength levels. The steel shall conform to the chemical requirements specified. These steel grades are normally used for High temperature pressure vessel steel plates and steel boiler plates. For A204 Grade A and SA204 Grade A pressure vessel steel plate, the minimum yield strength is 255 mpa, tensile strength within 450-585 mpa, for A204 Grade B and SA204 Grade B pressure vessel steel plate, the minimum yield strength is 275 mpa, tensile strength within 485-620 mpa, for boiler steel plate A204 Grade C and SA204 Grade C, yield strength shall be above 295 mpa, tensile strength from 515 mpa to 655 mpa. This specification covers molybdenum- alloy steel plates, is used in fabricators serving industry especially in gas, oil, chemical supply industries, infrastructure development, agriculture and boilers manufacturers. Conquest Steel & Alloys is an experienced boiler and pressure steel plate supplier which can offer you ASTM A204 steel plate of all grade (Grade A, Grade B, and Grade C) and dimension ranges as below.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Conquest Steel & Alloys is one of India’s leading supplier of IS 2062 E350 & E250 Steel plates, with excellence in the substantial supply of IS 2062 E350 & E250 steel plates to established and emerging businesses worldwide. Our innovative and novel approach has turned us into mega stockists of E350 & E250 Structural MS Steel plates, delivered on time, every time.

IS 2062 is Indian standard for carbon and mild steel grade E350, E350 BR, E350 BO, E350 C covers the requirement of our clients with engineered range of carbon steel plates and structure sections like angle, beam, channels etc.

High tensile strength E350 Plates are developed using high-end technology, which ensure their reliability and durability. This steel is designed to provide excellent welding and bending properties with substantial possibilities of savings in material cost, processing and handling. Due to its high tensile strength, it enables design of lighter, more durable and efficient products and structures. The general corrosion resistance, stress corrosion cracking, pitting and oxidation resistance is make it a best choice among all steels. The strength, as well as hardness, can be easily increased through the cold working operation and its structure can be turned into magnetic. In order to avoid embrittlement, the hot working process is induced and can be heated in controlled and ideal temperature for corrosion resistance.

Application Industries:

·        Automobile Industry

·        Agriculture Equipment

·        Offshore Industry

·        Infrastructure Industry

·        Paper Industry

·        Sugar Industry

·        Cement Industry

·        Port Building

·        Power Plants

·        Structural Steel Work 

 

CHEMICAL COMPOSITION OF IS 2062 E350C PLATE

 

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: AS PER DEMAND & REQUIRED

Product Details:

Conquest Steel and Alloys is a stockholder of an extensive range of first – in – class wear resistant and abrasion resistant Steel plates as we are suppliers of TISCRAL, SAILHARD, 200 BHN Steel plate. We have been able to offer our clients with world class Steel Plate-Grade C45, Tiscral plate, Sailhard plate.

Abrasion-resistant (AR) steel plate is a high-carbon alloy steel plate, which signifies that AR is formable and weather-resistant due to the added alloys, and harder due to the addition of carbon.
We are an acclaimed name engaged in offering our precious clients a superior quality range of TISCRAL Steel Plate which is manufactured from best in quality grade material & modern techniques, thus provides them properties like high durability and corrosion resistance ability. TISCRAL PLATES or wear resistance plates are special quality plates that can withstand immense pressure due to its toughness and ability to stand at high temperature and heavy loads. These plates are manufactured to perform long in the most harsh conditions. Tiscral / Sail hard/ 200 BHN steel plates are used in various industries including  food processing, petrochemical, architecture, and chemical transportation. Offered steel plates are tested on diverse parameters in order to deliver a defect free range. Customers can avail these steel plates in quality packing within a confine time.

 

Carbon is added during the formation of steel plate which considerably increases hardness and toughness, but reduces strength. Hence, the AR plate is employed in conditions where wear and tear and abrasions are the main causes of failure. The AR plate is not perfect for structural construction applications, like support beams in buildings or bridges.

These plates are used in construction and mining equipment manufacturing, conveyers, earthmoving and material handling equipments. 

Common applications of the AR plate include dump liners, grates, buckets, construction attachments, conveyors, etc;

It has many equivalent like SAILHARD, LLOYDS LAS07, etc. We at Conquest Steel & Alloys deals in all equivalent of TISCRAL steel plate. We have more then 200MT of stock of 200 BHN equivalent plate GARDE: TISCRAL PLATE, SAIL HARD PLATE, LLOYDS LAS07

We can supply:
Thickness: from 5mm to 50mm
Width: from 1,250mm to 2,500mm
Length: from 5,000mm to 6,300mm

Additional Information:

• Delivery Time: IMMEDIATE

Product Details:

Conquest Steel & Alloys is one of India’s leading supplier of IS 2062 E350 Steel plates, with excellence in the substantial supply of IS 2062 E350 steel plates to established and emerging businesses worldwide. Our innovative and novel approach has turned us into mega stockists of E350 Structural Steel plates, delivered on time, every time.

IS 2062 is Indian standard for carbon and mild steel grade E350, E350 BR, E350 BO, E350 C covers the requirement of our clients with engineered range of carbon steel plates and structure sections like angle, beam, channels etc.

High tensile strength E350 Plates are developed using high-end technology, which ensure their reliability and durability. This steel is designed to provide excellent welding and bending properties with substantial possibilities of savings in material cost, processing and handling. Due to its high tensile strength, it enables design of lighter, more durable and efficient products and structures. The general corrosion resistance, stress corrosion cracking, pitting and oxidation resistance is make it a best choice among all steels. The strength, as well as hardness, can be easily increased through the cold working operation and its structure can be turned into magnetic. In order to avoid embrittlement, the hot working process is induced and can be heated in controlled and ideal temperature for corrosion resistance.

Application Industries:

·        Automobile Industry

·        Agriculture Equipment

·        Offshore Industry

·        Infrastructure Industry

·        Paper Industry

·        Sugar Industry

·        Cement Industry

·        Port Building

·        Power Plants

·        Structural Steel Work 

 

CHEMICAL COMPOSITION OF IS 2062 E350C PLATE

 

 

 

Additional Information:

• Delivery Time: IMMEDIATE

Product Details:

DSQ plate satisfies quality demands that analogue plate systems have been unable to meet. The technology of designed image transfer enables results in corrugated post-printing that are comparable to those in pre-printing, provided that the substrate is of a sufficiently good grade.

The surface unevenness of the printing material is optimally compensated by the ideal shore hardness and the excellent restoring behavior of the DSQ plate. Depending on the desired relief depth of the plate, it is possible to produce plate with a screen of 120 lpi and a tonal range of 2-95%.

DSQ plate material features a very strong black layer which is produced under an exclusive patent. This patented technology enables easy handling of unexposed plate material. Because of the dynamics of the black mask layer, it is almost impossible to damage or smudge prior to the laser setting step. DSQ plate is suitable for use with flexo inks based on alcohole or water. It is permissible to use solvent mixtures containing a limited amount of active solvents (ethyl acetate content-preferably under 10%).

 

 

 

 

 

 

 

 

 

Chemical Composition :

 

 

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: AS REQUIRED

Product Details:

Duplex 2507 (UNS S32750) is a super duplex stainless steel with 25% chromium, 4% molybdenum, and 7% nickel designed for demanding applications which require exceptional strength and corrosion resistance, such as chemical process, petrochemical, and seawater equipment. The steel has excellent resistance to chloride stress corrosion cracking, high thermal conductivity, and a low coefficient of thermal expansion. The high chromium, molybdenum, and nickel levels provide excellent resistance to pitting, crevice, and general corrosion

Application:

• Oil and gas industry equipment
• Offshore platforms, heat exchangers, process and service water systems, fire-fighting systems, injection and ballast water systems
• Chemical process industries, heat exchangers, vessels, and piping
• Desalination plants, high pressure RO-plant and seawater piping
• Mechanical and structural components, high strength, corrosion-resistant parts
• Power industry FGD systems, utility and industrial scrubber systems, absorber towers, ducting, and piping

Characteristics of Duplex 2507:

• High resistance to chloride stress corrosion cracking
• High Strength
• Superior resistance to chloride pitting and crevice corrosion
• Good general corrosion resistance
• Suggested for applications up to 600 Degree F
• Low rate of thermal expansion
• Combination of properties given by austenitic and ferritic structure
• Good weldability and workability

Processing:

Hot forming:
2507 should be hot worked between 1875 DegreeF and 2250 DegreeF. This should be followed by a solution anneal at 1925 DegreeF minimum and a rapid air or water quench.

Cold Forming:
Most of the common stainless steel forming methods can be used for cold working 2507. The alloy has a higher yield strength and lower ductility than the austenitic steels so fabricators may find that higher

Heat Treatment:
2507 should be solution annealed and quenched after either hot or cold forming. Solution annealing should be done at a minimum of 1925 DegreeF. Annealing should be followed immediately by a rapid air or water quench. To obtain maximum corrosion resistance, heat treated products should be pickled and rinsed.

Welding:
2507 possesses good weldability and can be joined to itself or other materials by shielded metal arc welding (SMAW), gas tungsten arc welding (GTAW), plasma arc welding (PAW), flux cored wire (FCW), or submerged arc welding (SAW). 2507/P100 filler metal is suggested when welding 2507 because it will produce the appropriate duplex weld structure.
Preheating of 2507 is not necessary except to prevent condensation on cold metal. The interpass weld temperature should not exceed 300 DegreeF or the weld integrity can be adversely affected. The root should be shielded with argon or 90% N2/10% H2 purging gas for maximum corrosion resistance. The latter provides better corrosion resistance.

Additional Information:

• Delivery Time: IMMEDIATE
• Packaging Details: AS PER REQUIREMENT