Girgaon, Mumbai, Maharashtra GST No. 27AAFFC9175M1ZU

Call 08047636515 75% Response Rate

Send Email

Home
»
Product Range
»
Structural Steel

Structural Steel

Offering you a complete choice of products which include s355 structural steel plate, s275 structural steel plate, s420 structural steel plate, s460 structural steel plate, s355 / s355j2 / s355j2 n / jr / jo steel plate, din 17100 st52-3, e350c steel plate and sailma 350 / 350hi / 450 / 450 hi high tensile steel plate.

S355 Structural Steel Plate

Product Price: Rs 60 / KgGet Best Price

Product Brochure

Product Details:

Thickness (mm)	4mm TO 150mm
Yield Strength (Mpa)	315-355
Corrosion Resistant	No
Width	1250mm to 2,500mm
Length	6,000mm to 12,000mm
Tensile Strength	490-630 min (N / mm2)

Conquest Steel & Alloys is an exporter of S355 structural steel plates, known for massive strength and competence in hostile conditions. Offering quality products at pocket-friendly prices, we are suppliers of S355 JR High strength plates, sourced from the best mills, locally and internationally.

S355 steel plate is a high-strength low-alloy European standard structural steel covering four of the six categories within the EN 10025: 2004standard. With minimum yield of 50 ksi, it meets requirements in chemistry and physical properties similar to ASTM A572 / 709.

Careful attention should always be placed on the specific variation of S355 required if considering substitute material.

S355 Steel Plate Applications:

Heavy road vehicles: chassis, dumper bodies
Crane construction: booms for mobile cranes
Structural steelworks: bridge components, components for offshore structures
Pressure vessels: fixed and transportable storage tanks, vessels
Power plants: penstocks, spiral cases
Mining equipment: roof supports
Load-handling equipment and masts

We are stockist S355 JR, S355JO, S355J2, S355K2 and S355J2 + N, available as high tensile and high strength, normalized or control rolled steel plates.

High yield structural steel also supplied according to following standard and specifications.En S355 Steel, En S355Jr Steel Plate, En S355Jo Steel Plate, En S355J2 Steel Plate, En S355J2+N Steel Plate, En S355K2 Steel Plate, En 10025: S355J2G3 Steel Plate, En 10025: S355J2G3+N Steel Plate, En 10025: S355J2+N Steel Plate, En 10025: S355J2G4 Steel Plate, Sailma 350 Steel, Sailma 350Hi Steel, Is 2062 E350A Plate, Is 2062 E350B Plate, Is 2062 E350C Plate, Din St52-3 Steel, Din St52-3N Steel, Din St52-3U Steel, Is Fe540Wht Steel, Is Fe570Ht Steel, Is 8500 Fe490B Steel Plate, Is 8500 Fe540 Steel Plate, A 572 Steel Plate, Astm A656 Steel Plate,En Fe510B Steel, En Fe510C Steel, En Fe510D1 Steel Plate, En Fe510D2 Steel Plate, Is 961 Steel Plate, Jis Ss490B Steel Plate.

Applications:

Transmission towers
Freight cars
Railway trucks
Building structures
Lifting equipment
Pipework
Oil and gas platforms
Shipbuilding

Welding:
This steel can be welded relatively easily to other weldable steels, a process enabled by its high tensile strength and lower carbon content.

Forming:
This grade offers quite good cold forming capability but isn''t well suited to hardening, aside from limited heat treatment processes.
If heat treatment is undertaken, factors such as furnace type, component dimensions, rate of heating and cooling should all be taken into consideration.

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Get Best QuoteRequest A Callback

S275 Structural Steel Plate

Product Price: Rs 55 / KgGet Best Price

Minimum Order Quantity: 500 Kg

Product Details:

Material Grade	S275
Type	STRUCTURAL STEEL
Thickness	4mm TO 150mm
Size	1250/2500 X 6000/12000
Usage/Application	Construction
Shape	Rectangular
Thickness (mm)	4mm TO 150mm
Yield Strength (Mpa)	225 - 275
Width	1250mm to 2,500mm
Length	6000mm to 12000mm

Conquest Steel & Alloys is an S275 Steel plate supplier, exhibiting best processing properties during welding, edging and cutting. Traits akin to ASTM A36, they function in architectural works of little welding and forming possibilities. S275 steel plate meets European structural steel standard EN 10025 : 2004. S275 structural steel plate is a common carbon structural steel with minimum yield strength of 36 ksi, it bears many similarities to ASTM A36 in both chemistry and physical properties. S275 structural steel plate can be bolted, riveted and welded in a full range of construction and fabrication including bridges and other general structural projects.

High yield structural steel also supplied according to following standard and specifications.En S275 Steel, En S275Jr Steel Plate, En S275Jo Steel Plate, En S275J2 Steel Plate, Sailma 300 Steel, Sailma 300Hi Steel, Is 2062 E300A Plate, Is 2062 E300B Plate, Is 2062 E300C Plate, Din St44-2 Steel, Din St 44-3 Steel, Din St 44-3U Steel, Is Fe410Wa Steel, Is Fe410Wc Steel, Is 8500 Fe440B Steel Plate, A 529 Steel Plate, Astm A36 Steel Plate, En Fe430D2 Steel, En Fe430C Steel, En S275J2G4 Steel Plate, En 10149-2 S315Mc Steel Plate

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Delivery Time: IMMEDIATE

Get Best QuoteRequest A Callback

S420 Structural Steel Plate

Product Price: Rs 65 / KgGet Best Price

Product Details:

Material Grade	S420
Type	STRUCTURAL STEEL
Size	1250/2500 X 6000/12000
Usage/Application	Construction
Shape	Rectangular
Thickness	4mm to 150mm
Width	1250mm to 2,500mm
Length	6,000mm to 12,000mm
Tensile Strength	480-620 Mpa

Conquest Steel & Alloys is one of India’s leading suppliers of Structural Steel products, with excellence in the substantial supply of structural steel plates to established and emerging businesses worldwide. Our innovative and novel approach has turned us into mega stockists of S420 Structural Steel plates, delivered on time, every time. S420 steel plate is a high-strength low-alloy European standard structural steel falls within the EN 10025: 2004 standard. S420 structural steel plate is only produced as normalized or thermomechanical rolled material. Some variations of S420 structural steel plate include S420, S420N, S420NL, S420G1+Q, S420G1+M, S420G2+Q, and S420G2+M. Each structural steel grade has the prefix “S” and is followed by suffixes that denote difference in the specific requirement for that structural application. Structural steels can be used in a number of ways and their application is very diverse. Most structural steels are very useful as they provide a unique combination of good welding properties with high strengths. A wide range of structural steels such as offshore steels, wear resistant grades, high strength steels, boiler and pressure vessel steels, and shipbuilding grades are available in the market today. These steels are very adaptable and are preferred by engineers who want to maximize strength or structure while minimizing its weight.

High yield structural steel also supplied according to following standard and specifications.
EN S420 STEEL, EN S420NL STEEL PLATE, EN S420MC STEEL PLATE, EN S420MH STEEL PLATE, EN S420G1+Q STEEL PLATE, EN S420G1+M STEEL PLATE, EN S420G2+Q STEEL PLATE, EN S420G2+M STEEL PLATE, SAILMA 410 STEEL, SAILMA 410HI STEEL, IS 2062 E410A PLATE, IS 2062 E410B PLATE, IS 2062 E410C PLATE, DIN St54 STEEL, IS 8500 Fe540B STEEL PLATE, IS 8500 Fe540 STEEL PLATE, DIN 17102: StE420 STEEL, DIN 17102: TStE420 STEEL PLATE, DIN QStE420TM STEEL PLATE, EN 10025: ST 54 STEEL, EN 10149-2: S420MC STEEL PLATE.

Typical Applications Include:

Power plants
Mining and earth-moving equipment
Load-handling equipment
Offshore structures
Ship Building
Oil And Gas Platforms
Construction
Structural Application in Freight Cars, Transmission Towers, Dump Trucks, Cranes, Trailers.
Palm Oil Equipments And Machineries
Mechanical Manufacturin

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Get Best QuoteRequest A Callback

S460 Structural Steel Plate

Product Price: Rs 70 / KgGet Best Price

Product Details:

Type	STRUCTURAL STEEL
Thickness	4mm - 150mm
Usage/Application	Construction
Shape	Rectangular
Thickness (mm)	4mm TO 150mm
Material Grade	S460
Yield Strength (Mpa)	370-460
Width	1250mm to 2,500mm
Length	6000mm to 12000mm

Conquest Steel & Alloys renders a complete solution covering S460 Structural Steel plates to meet your customized demands. We are the leading exporters of S460 Carbon Structural Steel plates, leveraging our healthy relationship with mill owners across the globe, offering normalized, weldable fine grain structural steel plates catering to the offshore industry. Structural steel 460 is a specially designed steel for use in harsh environments such as offshore structures. Some variations of S460 structural steel plate include S460N, S460NL, S460G1+Q, S460G1+M, S460G2+Q , and S460G2+M. Each structural steel grade has the prefix “S” and is followed by suffixes that denote difference in the specific requirement for that structural application. S460 structural steel falls within the European standard structural steel of EN 10025: 2001 standard. The steel is available in either quenched (Q) or thermo-mechanically rolled (M) condition. Higher yield, tensile strength provides this steel with good weldability characteristics and can be supplied as heavy carbon steel plates or fabricated sections.

High yield structural steel also supplied according to following standard and specifications.
EN S460 STEEL, EN S460N STEEL PLATE, EN S460NL STEEL PLATE, EN S450JO STEEL PLATE, SAILMA 450 STEEL, SAILMA 450HI STEEL, IS 2062 E450A PLATE, IS 2062 E450B PLATE, IS 2062 E450C PLATE, IS 8500 Fe570B STEEL PLATE, IS 8500 Fe570 STEEL PLATE, DIN 17102: StE460 STEEL, DIN 17102: TStE460 STEEL PLATE, EN 10149-2: S460MC STEEL PLATE.

Applications:

Ship Building
Oil and Gas Platforms
Power Plant
Construction
Structural Application in Freight cars, Transmission Towers, Dump Trucks, Cranes, Trailers..
Palm Oil Equipments And Machineries
Mechanical manufacturing

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Get Best QuoteRequest A Callback

S355 / S355J2 / S355J2 N / JR / JO Steel Plate, Din 17100 St52-3, E350c Steel Plate

Product Price: Rs 45 / KgGet Best Price

Minimum Order Quantity: 500 Kg

Product Brochure

Product Details:

Thickness	3mm - 300mm
Usage/Application	CONSTRUCTION,INFRASTRUCTURE,AUTOMOBILE,AGRICULTURE ETC.
Material Grade	S355,S355J2/JR/JO,S355J2+N,ST52-3,E350C
YIELD STRENGTH	315-355 MPa
TENSILE DTRENGTH	490-630 MPa
ELONGATION	22%

Conquest Steel & Alloys is a stock holder and supplier of S355J2+N Steel plates. Our innovative and novel approach has turned us into mega stockists of S355 Structural Steel plates, delivered on time.

S355J2+N is a most common high strength steel used in construction. It is a non alloy low carbon mild steel with EN 10025 specification. Being an unalloyed carbon mild steel it is supplied to customers in hot rolled condition. S355 is offering the high yielding as well as high tensile strength with the minimum 355 N/mm2 yielding strength. It has excellent cold forming properties and plates are often produced using killed steel process and exported to customers in controlled rolling or normalized condition. Here the symbol S is used for structural steel and JR symbol is used for temperature impact test. S355 structure steel supplies in various grades as S355J2, S355JR, S355JO, S355J2G3 and has equivalent grades as ST52-3, IS 2062 E350 C, covers the requirement of our clients with engineered range of carbon steel plates and structure sections like angle, beam, channels etc.

High tensile strength S355 / E350 Plates are developed using high-end technology, which ensure their reliability and durability. This steel is designed to provide excellent welding and bending properties with substantial possibilities of savings in material cost, processing and handling. Due to its high tensile strength, it enables design of lighter, more durable and efficient products and structures. The strength, as well as hardness, can be easily increased through the cold working operation and its structure can be turned into magnetic. These plates are considered bets and widely used in different industries and applications due to its excellent features like excellent strength, hardness, good resistance to corrosion, pitting, cracking and durability. In order to avoid embrittlement, the hot working process is induced and can be heated in controlled and ideal temperature for corrosion resistance.

_{CHEMICAL COMPOSITION OF S355J2+N PLATE}

_Grade	_C	_Mn	_Si	_P	_S	_Cu	_CEV
_S355J2+N	_{0.22 max.}	_{1.60 max.}	_{0.55 max.}	_{0.035 max.}	_{0.035 max.}	_{0.55 max.}	_{0.47 max.}

Additional Information:

Delivery Time: IMMEDIATE

Get Best QuoteRequest A Callback

Sailma 350 / 350hi / 450 / 450 Hi High Tensile Steel Plate

Product Price: Rs 45 / KgGet Best Price

Minimum Order Quantity: 500 Kg

Product Brochure

Product Details:

Material Grade	SAILMA 350 / IS 2062 E350C / S355J2+N STEEL PLATE
Type	STRUCTURE STEEL PLATE
Brand	SAIL / ESSAR / UTTAM
Size	1250 - 6300/12000
Usage/Application	Construction
Shape	Rectangular
Standard	INDIAN STANDARD
Elongation	20%
Hardness	350 BHN
Tensile Strength	490-610 MPa
Yield Min Mpa	350 MPa
I Deal In	New Only

Conquest Steel & Alloys has an elaborate range of SAILMA 350 high tensile structure steel plates, celebrated for their flexibility and sustainability. Our Structural steel products help customers to meet their vital project requisites in a cost-efficient manner.

SAILMA 350 high tensile structural steel plates normally supplied in tempered and Quenched condition. Due to its high strength, it enables design of lighter, more durable and efficient products and structures. This steel is designed to provide superior welding and bending properties and it offers substantial possibilities for savings in material costs, processing and handling.

HIGH TENSILE STEEL PLATES

SAIL (INDIAN)	IS 2062	IS 8500	EN 10025	EN 10149-2	SEW 092:1990	DIN
SAILMA 300 SAILMA 300HI	GRADE E300	FE 440 B	-	S315MC	QstE300TM	1.0972
SAILMA 350 SAILMA 350HI	GRADE E350	FE 490 B	ST 52.3	S355MC	-	1.0976
SAILMA 410 SAILMA 410HI	GRADE E410	FE 540 B	ST 54	S420MC	QstE420TM	1.0980
SAILMA 450 SAILMA 450HI	GRADE E450 D	FE 570 B	-	S460MC	QstE460TM	1.0982

Chemical Composition

Grade	C max %	Si max %	Mn max %	P max %	S Max %	AL min %	Nb + V + Ti max %	Deoxidation
SAILMA 350	0.25	0.40	1.50	0.055	0.055	0.01	0.2	Killed

Mechanical Properties
GRADE: SAILMA 350
YEILD STRENGTH: 350 MPa min.
TENSILE STRENGTH: 490-610 MPa min
ELONGATION: 20%

Additional Information:

Delivery Time: IMMEDIATE

Get Best QuoteRequest A Callback

A514 Structure Steel ASTM

Product Price: Rs 115 / KilogramGet Best Price

Minimum Order Quantity: 500 Kilogram

Product Details:

Usage/Application	Construction
Grade	A514
Thickness	3mm to 140mm
Width	1250/1500/2500
Length	5000mm to 12000mm
Elongation	18% Min
Tensile	760-895 Mpa

Conquest Steel & Alloys are suppliers of A514 grade Structural Steel plates, fashioned to suit a spectrum of structural essentials. We aim to fulfill niche demands of each industry, tailoring our services to provide clients with the finest products at affordable rates. ASTM A514 plate steel has a min-yield strength of 100 ksi/690 MPa. It’s most commonly used as a structural steel in building construction, for cranes, or other large machines supporting high loads.

A514 is used where a weldable, machinable, very high strength steel is required to save weight or meet ultimate strength requirements.

ASTM A514 steel is a quenched and tempered alloy steel used in applications that require a particularly high yield strength. A514 has a minimum yield strength of 100 ksi (690 MPa).
Grades B, S and E are by far the most common, however, we have other grades available. Each grade is limited to a range of thicknesses. All grades have the similar mechanical properties, but vary in chemical makeup and thickness.

Compliant with the ASTM standards, these High Strength Alloy (HSA) steel plates stand for:

S = Structural Steel
514 = minimum yield strength
Q = quenched and tempered
A, B, C, E, F, H, J, K, M, P, Q, R, S, T= grades

A514 steel can be cut with a variety of methods and can be machined using conventional equipment and carbide tools. ASTM A514 steel has excellent weldability.

A514 steel is commonly used in heavy equipment parts that require a higher strength at a reduced weight, such as crane booms, mining equipment, hauling equipment, and lifting equipment.

A514 steel is particularly well suited for wear resistant steel plates used for large tooling, digging, clearing, and scraping. Examples include scraper bars for coal mining conveyors and conveyor flights; dirt, ground and rock scraper blades and bucket scrapers for large mining and farm implements, and for the many wear plates, screen plates, and wear bars that are required to take the abuse that large mining equipment and construction equipment demands.

High yield structural steel also supplied according to following standard and specifications.
EN S700MC STEEL, ASTM A514 GR.A, ASTM A514 GR.B, ASTM A514 GR.C, ASTM A514 GR.E, ASTM A514 GR.F, ASTM A514 GR. H, ASTM A514 GR.J, ASTM A514 GR.K, ASTM A514 GR.M, ASTM A514 GR.P, ASTM A514 GR.Q, ASTM A514 GR.R, ASTM A514 GR.S, ASTM A514 GR.T, S700MC HIGH YIELD STEEL PLATE, SEW 092 QStE 690TM STEEL PLATE, AFNOR NF A36-231 E690D STEEL PLATE, 1.8974.

Get Best QuoteRequest A Callback

S235 Structural Steel Plate

Product Price: Rs 55 / KilogramGet Best Price

Product Details:

Thickness (mm)	4mm TO 150mm
Material Grade	S235
Yield Strength (Mpa)	215-235
Width	1250mm to 2,500mm
Length	6,000mm to 12,000mm

Conquest Steel & Alloys has an elaborate range of S235 structural high tensile steel plates, celebrated for their flexibility and sustainability. Our Structural steel products help customers to meet their vital project requisites in a cost-efficient manner.
S235 structural steel plate meets European structural steel standard EN 10025: 2004. S235 structural steel plate is a common carbon structural steel that can be used in a very broad range of fabrication processes. With minimum yield strength of 33 ksi at 16mm, this plate has excellent formability but is limited in applications requiring higher weight-bearing structural specifications.

Inline with the European Standard classifications, Structural steels must be referenced using standard symbols including but not limited to: "S"235"J2''K2''C''Z''W''JR''JO''

Where:

S - denotes the fact that it is Structural Steel
235 - related to the minimum yield strength of the steel (tested at a thickness of 16mm)
J2 / K2 / JR / JO - material toughness in relation to the Charpy impact or 'V'notch test methodology
W - Weathering Steel (Atmospheric Corrosion Resistant)
Z - Structural steel with improved strength perpendicular to the surface
C - Cold-formed

High yield structural steel also supplied according to following standard and specifications.En S235 Steel, En S235Jr Steel Plate, En S235Jo Steel Plate, En S235J2 Steel Plate, Sailma 250 Steel, Sailma 250Hi Steel, Is 2062 E250A Plate, Is 2062 E250B Plate, Is 2062 E250C Plate, Is 226 Steel Plate, Din Rst37-2 Steel, Din St 37-2 Steel, Din St 37-3U Steel, En Fe360C Steel, Is Fe410-S Steel, A 283C Steel Plate, A 284C Steel Plate, A 284D Steel Plate, Astm A36 Steel Plate, En Fe360D2 Steel, En S235J2G4 Steel Plate

Get Best QuoteRequest A Callback

High Yield Structural Steel:S690QL

Product Price: Rs 110 / KgGet Best Price

Product Brochure

Product Details:

Application	AEROSPACE INDUSTRY, PAPER INDUSTRY, Construction, Pharmaceutical / Chemical Industry, Oil & Gas Industry
Thickness (mm)	4mm TO 150mm
Width	1250mm to 2,500mm
Length	6,000mm to 12,000mm
Tensile Strength	770 - 940 Mpa
YIELD STRENGTH	690

Structural Steel plate is a speciality of Conquest Steel and Alloys, stockist, supplier and exporter of Stainless Steel, Carbon Steel and Nickel Alloy pipes and plates in India.

A Structural Steel plate is a plate produced from Steel, Stainless Steel, Carbon Steel, etc. while Manganese, Alloy and Nickel can be added to them to improve their total vigour. These plates, commonly known as S690QL and S690QL1, are used as materials for constructing buildings and everyday objects.

S690 QL is a high yield structural steel grade produced in compliance with EN 10025:6:2004. The material is heat treated using the quench and temper process and has good bending and welding properties. Due to the materials high strength nature, using S690QL will leaner designed structures with increased payload capacity and energy efficiency. S690QL plate is an excellent material. It is of high and consistant quality through out. It''s flatness is good, and so is the surface finish. And it is also easy to machine. Neither welding nor blending ever gives any problem. S690QL is the best structural steel for larger trailers.

S690QL STEEL PLATE GRADE AND SPECIFICATION EN10025-6 S690QL Steel Plates Due to the materials high strength nature, using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency.

High yield structural steel also supplied according to following standard and specifications.
EN 10025-6:2004 S690QL STEEL, ASTM A709-100 STEEL PLATE, NAXTRA 70, JFE HITEN 780LE STEEL PLATE, DILLIMAX 690 STEEL PLATE, AFNOR NF A36-204 E690T, S690T STEEL PLATE, FeE690VKT, WELDOX 700, WELDOX 780, ISO 63-5:2016 E690, ALFORM 700, 1.8928.

Applications:

Heavy transportation
Machine building
Steel constructions
Lifting equipment
Fabricated bridges tower and building members
Dipper sticks
Mining equipments
Penstocks
Dumper bodies
Turbine scroll cases and unfired pressure vessels
Mobile cranes

Benefits:

Speed of construction
Cost savings in a competitive market
Long life durabilily
Health & safety
High yield, high strength plate
Excellent forming and welding properties
Ideal for weight saving, high stress applications
Suitable for crane booms, mining and earthmoving equipments

Additional Information:

Item Code: S690
Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Get Best QuoteRequest A Callback

High Yield Structural Steel: S890

Product Price: Rs 250 / KilogramGet Best Price

Minimum Order Quantity: 500 Kilogram

Product Details:

Usage/Application	Oil & Gas Industry
Thickness (mm)	from 4mm to 150mm, 4mm - 150mm
Tensile Strength	940 - 1100 MPa
Grade	S890QL
Material	HIGH YIELD STRENGTH STEEL
Yield Strength Of Steel	890 MPa
Elongation	11%
Width	From 1250mm to 2,500mm
Length	From 6,000mm to 12,000mm

S890QL Structural Steel plates have occupied the construction industry with their high yield strength to hold together structures for centuries. Conquest Steel and Alloys are distributors of S890QL Structural Steel plates, one of the strongest Steel plates that are known for being resourceful, adaptable and cost-efficient. S890QL is a structural steel grade with an even greater yield strength than S690QL and 130 ksi minimum yield point, it combines strength with excellent weldability and formability.The material serves as a great option for procurer who wishes to promote high strength in a cost-effective way. Due to the characteristics of the steel, clients can use this material in numerous application resulting in a leaner build whilst still maintaining great strength. S890QL is a water quenched & tempered steel which complies with the EN 10025:6:2004 specification. It is relatively easy welding and fabricates. It became more and more popular in the crane, oil and gas, mining, earthmoving, agricultural, trailers, theme park, bridge building, extreme weather search and rescue industries and modern super structural design where light weight and leaner thickness steel plate with increase payload capacity. Today, beautiful high-rise buildings and super architectural design art has become reality because of the discovery of S890QL steel plate.S890 steel plate meets design and fabrication challenges for modern heavy equipment such as heavy haul trailers, cranes booms, truck frames and logging & construction equipment as well as design fabrications that exceed the capabilities of S690. S890 offers design opportunities for weight reduction and increased payload and is more user-friendly for today’s modern fabrication methods.

Get Best QuoteRequest A Callback

High Yield Structural Steel:S960QL

Product Price: Rs 250 / KgGet Best Price

Product Details:

Application	Oil & Gas Industry, paper Industry, aerospace Industry, Fertilizer Industry, Construction, Pharmaceutical / Chemical Industry
Thickness (mm)	4mm TO 150mm
Steel Grade	S960
Width	1250mm to 2500mm
Length	6000mm to 12000mm
Tensile Strength	980 - 1150 Mpa

Conquest Steel and Alloys is a supplier and stockist of S960 structural Steel plates, supplied to multi-faceted businesses, having outstanding quality, great resistance to mechanical stresses and tolerates high-temperature fluctuations in corrosive areas. S960QL is a structural steel grade with an even greater yield strength than S890QL. It is a High strength steel (960 MPa) that provides a unique combination of strength and toughness together with first – rate workshop properties. It is intended for load carrying structures with high demand on low weight. S960QL is a water quenched & tempered steel which complies with the EN 10025:6 specification. It is relatively easy welding and fabricate. It has becoming more and more popular in crane, oil and gas, mining, earthmoving, agricultural, trailers, theme park, bridge building, extreme weather search and rescue industries and modern super structural design where light weight and leaner thickness steel plate with increase payload capacity. Today, beautiful high-rice buildings and super architectural design art has become reality because of the discovery of S960QL steel plate.

High yield structural steel also supplied according to following standard and specifications.
EN 10025-6:2004 S960QL STEEL, S960HIGH YIELD STEEL PLATE, JFE HITEN 960LE STEEL PLATE, DILLIMAX 965 STEEL PLATE, DILLIMAX 965T STEEL PLATE, TStE960V STEEL PLATE, AFNOR NF A36-204 E960T, S960T STEEL PLATE, WELDOX 960, ISO 630-5 : 2016 E960, ALFORM 960, 1.8933.

Applications:

Heavy transportation
Machine building
Steel constructions
Lifting equipment
Fabricated bridges tower and building members
Dipper sticks
Mining equipments
Penstocks
Dumper bodies
Turbine scroll cases and unfired pressure vessels
Mobile cranes

Benefits:

Speed of construction
Cost savings in a competitive market
Long life durabilily
Health & safety
High yield, high strength plate
Excellent forming and welding properties
Ideal for weight saving, high stress applications
Suitable for crane booms, mining and earthmoving equipments

Additional Information:

Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Get Best QuoteRequest A Callback

High Yield Structural Steel: S1100 QL

Product Price: Rs 250 / KgGet Best Price

Minimum Order Quantity: 500 Kg

Product Details:

Usage/Application	Oil & Gas Industry
Thickness	6MM - 40MM
Material	SS
Plate Thickness	6-40 mm
Tensile Strength	1250 - 1550 (MPa)
Grade	S1100 QL

Conquest Steel & Alloys supply A1100QL Structural Steel plates to global businesses that demand steel plates with excellent material properties, superior strength, resistance to abrasion and prime finished.
S1100QL & S1300QL are high yield steel with a minimum strength of 1100&1300 MPa respectively. S1100QL according to EN10025-6 is a quenched and tempered steel and is relatively easy to bend and weld. It is a fully killed steel with a fine grain structure where all the nitrogen is bounded by binding agents. Both can be classed as “Ultra High Yield Structural Steel”. These new steels are used and specified in the heavy lifting Industry. This Industry has an ongoing requirement for stronger and lighter structural sections which are used in the manufacture of crane booms. Both S1100QL and S1300QL are perfect for this purpose.
High yield structural steel also supplied according to following standard and specifications.EN 10025-6:2004 S1100QL STEEL, S1100QL HIGH YIELD STEEL PLATE, S1300QL HIGH YIELD STEEL PLATE,JFE HITEN 1180STEEL PLATE, DILLIMAX 1100 STEEL PLATE,DILLIMAX 1300 STEEL PLATE, WELDOX 1100, ALFORM 1100, 1.8942.

APPLICATIONS OF S1100QL& S1300QL

Heavy transportation
Machine building
Steel constructions
Lifting equipment
Trailer and agriculture equipments
Steel construction
Fabricated bridges tower and building members
dipper sticks
Mining equipments
Penstocks
Dumper bodies
turbine scroll cases and unfired pressure vessels
Mobile cranes
bucket parts for power
components for earthmoving or transport equipments
shovels or cranes
Cranes booms
Crawler cranes

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

View Complete Range >

Looking For "Structural Steel"?

Thank youYour Enquiry has been sent successfully.

Structural Steel

S355 Structural Steel Plate

S275 Structural Steel Plate

S420 Structural Steel Plate

S460 Structural Steel Plate

S355 / S355J2 / S355J2 N / JR / JO Steel Plate, Din 17100 St52-3, E350c Steel Plate

Sailma 350 / 350hi / 450 / 450 Hi High Tensile Steel Plate

A514 Structure Steel ASTM

S235 Structural Steel Plate

High Yield Structural Steel:S690QL

High Yield Structural Steel: S890

High Yield Structural Steel:S960QL

High Yield Structural Steel: S1100 QL

EXPLORE MORE CATEGORIES

Steel Plates

Stainless Steel Products

Abrasion Resistant Steel Plates

Corten Steel

Wear Resistance Steel Plates

S690QL HIGH YIELD STRUCTURAL STEEL