- Home
- ยป
- Product Range
- »
- Abrasion Resistant Steel Plates
Abrasion Resistant Steel Plates
Abrex 500 Abrasion Resistant Steel Plate
Minimum Order Quantity: 500 Kg
Product Brochure
Material Grade | ABREX 500 |
Type | WEAR RESISTANT STEEL |
Thickness | 5mm - 150mm |
Brand | NSSMC, JAPAN |
Size | 1500/2000 X 2500/6000 |
Usage/Application | Industrial |
Hardness | 500 BHN |
Tensile Strength | 470 - 530 MPa |
Yield Min Mpa | 1250 MPa |
Carbon Contain | 0.35% |
Manganese | 2% |
Phosphorus | 0.015% |
Silicon | 0.7% |
Sulphur | 0.01% |
I Deal In | New Only |
Conquest Steel and Alloys continually works on upgrading its production process to offer unbeatable and exquisite products. Our constant search for innovation and quality has led to us producing Abrasion resistant 500 Steel plates, which repel wear too.
Conquest Steel & Alloys is one of the leading supplier & stockist for Abrex 500 and Abrex 500 equivalent like Hardox 500, Rockstar 500, Welhard 500, Sumihard K500, Swebor 500, Raex 500, Dillidur 500, Hardox drilling, Wear plates.
We Are Authorized Stockist Of Abrex Brand Wear Plates From Nssmc Japan.
ABREX 500 is a multi-use , abrasion - resistant steel at 500 HBW that combines high toughness, good bendability and good weldability, therefore this steel can be used in structures with mode rate wear. |
ABREX 500 is also known as Wear Plates which are designed to last longer than standard mild steel. The most common hardness levels in the category are 400 and 500. The combination of hardness , strength and toughness make it stand up to extreme wear. This can replace expensive wear products like high chrome white iron and hard-faced overlay plates. Even though it is too tough, it can be cut, welded, milled and drilled using standard workshop practices. |
The use of abrasion resistant ABREX steel plate markedly reduces the weight of structural members exposed to severe abrasive conditions. Very hard, Abrex steel plates that are less subject to abrasion than ordinary steel plates are widely used for conveyors, bulldozer blades, wearing parts of agricultural machines, dump truck vessels, construction equipment, hydraulics shovel and wheel loader buckets. By using abrasion-resistant steel plates ABREX 500, it is possible to not only reduce the weight and enhance the performance of the machine but also cut the running cost of the machine, including the cost of repair, replacement, etc. of parts. On the other hand, abrasion-resistant steel plates are required to have not only superior hardness but also excellent low-temperature toughness to secure sufficient reliability of steel plates in cold regions as well as good weldability and bending workability to allow for efficient fabrication work. As abrasion-resistant steel plates that meet the above requirements, Nippon Steel & Sumitomo Metal Corporation has newly added the ABREX™ (abrasion Resistance excellent) series to the conventional abrasion-resistant steel plates, WEL-HARD, WELTEN™AR, and SUMIHARD. According to hardness, ABREX is divided into four standard types as ABREX 400, ABREX 450, ABREX 500 & ABREX 600 and three extra-tough types as ABREX 400LT, ABREX 450LT & ABREX 500LT.
Additional Information:
- Delivery Time: IMMEDIATE
Abrex 450 Abrasion Resistant Steel Plate
Minimum Order Quantity: 500 Kg
Product Brochure
Material Grade | ABREX 450 |
Type | WEAR PLATE |
Thickness | 4mm - 50mm |
Brand | NSSMC, JAPAN |
Size | 2000 X 6000 |
Usage/Application | Industrial |
Hardness | 450 BHN |
Yield Min Mpa | 1100-1300 MPa |
Carbon Contain | 0.26% |
Manganese | 1.6% |
Phosphorus | 0.025% |
Silicon | 0.7% |
Sulphur | 0.01% |
I Deal In | New Only |
Conquest Steel & Alloys is one of the leading supplier & stockist for Abrex 450 and Abrex 450 equivalent like Hardox 450, Rockstar 450, Welhard 450, Sumihard K450, Swebor 450, Sailhard, CNC plazma cutting, Tiscral, C45 Plates, Raex 450, Dillidur 450, Hardox drilling, Wear plates.
We Are Authorized Stockist Of Abrex Brand Wear Plates From Nssmc Japan.
The use of abrasion resistant ABREX steel plate markedly reduces the weight of structural members exposed to severe abrasive conditions. Very hard, Abrex steel plates that are less subject to abrasion than ordinary steel plates are widely used for conveyors, bulldozer blades, wearing parts of agricultural machines, dump truck vessels, construction equipment, hydraulics shovel and wheel loader buckets. By using abrasion-resistant steel plates ABREX 450, it is possible to not only reduce the weight and enhance the performance of the machine but also cut the running cost of the machine, including the cost of repair, replacement, etc. of parts. On the other hand, abrasion-resistant steel plates are required to have not only superior hardness but also excellent low-temperature toughness to secure sufficient reliability of steel plates in cold regions as well as good weldability and bending workability to allow for efficient fabrication work. As abrasion-resistant steel plates that meet the above requirements, Nippon Steel & Sumitomo Metal Corporation has newly added the ABREX™ (abrasion Resistance excellent) series to the conventional abrasion-resistant steel plates, WEL-HARD, WELTEN™AR, and SUMIHARD. According to hardness, ABREX is divided into four standard types as ABREX 400, ABREX 450, ABREX 500 & ABREX 600 and three extra-tough types as ABREX 400LT, ABREX 450LT & ABREX 500LT.
Additional Information:
- Delivery Time: IMMEDIATE
Abrex 400 Abrasion Resistant Steel Plate
Minimum Order Quantity: 500 Kg
Product Brochure
Material Grade | ABREX 400 |
Type | ABRASION RESISTANT STEEL PLATE |
Size | 1500/2500 TO 6000/12000 |
Material | WEAR PLATE |
Usage/Application | Industrial |
Elongation | 10% |
Hardness | 400 BHN |
Tensile Strength | 1250 MPa |
Yield Min Mpa | 1000 MPa |
Carbon Contain | 0.15 - 0.32 |
Manganese | 1.60 |
Phosphorus | 0.025 |
Silicon | 0.70 |
Sulphur | 0.01 |
I Deal In | New Only |
Conquest Steel & Alloys is one of the leading supplier & stockist for Abrex 400 and Abrex 400 equivalent like Hardox 400, Rockstar 400, Welhard 400, Sumihard K400, Swebor 400, Sailhard, CNC plazma cutting, Tiscral, C45 Plates, Raex 400, Dillidur 400, Hiten 780, Hardox drilling, Wear plates.
We Are Authorized Stockist Of Abrex Brand Wear Plates From Nssmc Japan.
The use of abrasion resistant ABREX steel plate markedly reduces the weight of structural members exposed to severe abrasive conditions. Very hard, Abrex steel plates that are less subject to abrasion than ordinary steel plates are widely used for conveyors, bulldozer blades, wearing parts of agricultural machines, dump truck vessels, construction equipment, hydraulics shovel and wheel loader buckets. By using abrasion-resistant steel plates ABREX 400, it is possible to not only reduce the weight and enhance the performance of the machine but also cut the running cost of the machine, including the cost of repair, replacement, etc. of parts. On the other hand, abrasion-resistant steel plates are required to have not only superior hardness but also excellent low-temperature toughness to secure sufficient reliability of steel plates in cold regions as well as good weldability and bending workability to allow for efficient fabrication work. As abrasion-resistant steel plates that meet the above requirements, Nippon Steel & Sumitomo Metal Corporation has newly added the ABREX™ (abrasion Resistance excellent) series to the conventional abrasion-resistant steel plates, WEL-HARD, WELTEN™AR, and SUMIHARD. According to hardness, ABREX is divided into four standard types as ABREX 400, ABREX 450, ABREX 500 & ABREX 600 and three extra-tough types as ABREX 400LT, ABREX 450LT & ABREX 500LT.
Additional Information:
- Delivery Time: IMMEDIATE